Aluminum Foil Fiberglass Cloth Tape - AG1806HK
Description:
Aluminum-Glass Cloth backing (18u Foil / FR Glue / 8 x 8 Mesh Glass Cloth), combined with a high performance & high tack rubber resin adhesive, protected by an easy-release silicone kraft release paper.
Standard Products:
| Product code | Aluminum Foil Fiberglass Cloth Tape - AG1806HK |
| Material | 18u Foil / FR Glue / 8 x 8 Mesh Glass Cloth |
| Gule | High performance & High tack rubber resin adhesive |
| Cut Roll | 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4") |
| Log Roll | 1200mm x 45M / 50M |
| Jumbo Roll | 1200mm x 500M / 750M |
| Sample | Free, Freight on buyer |
Typical Physical Properties:
| PROPERTIES | METRIC | ENGLISH | TEST METHOD |
| Backing Thickness | 125 Micron | 5.0 Mil | PSTC-133 / ASTM D 3652 |
| Total Thickness | 225 Micron | 9 Mil | PSTC-133 / ASTM D 3652 |
| Adhesion to Steel | 25 N/25mm | 90 Oz./In. | PSTC-101 / ASTM D 3330 |
| Tack Rolling Ball | 5 cm | 2.0 In. | PSTC-6 / ASTM D 3121 |
| Tensile Strength | 255 N/25mm | 58.0 Lb/In | PSTC-131 / ASTM D 3759 |
| Elongation | 5.0% | 5.0% | PSTC-131 / ASTM D 3759 |
| Service Temperature | -20 ~ +80 °C | -4 ~ +176 °F | ------------ |
| Applying Temperature | +10 ~ +40 °C | +50 ~ +105 °F | ------------ |
Features:
• Aluminum-Glass Cloth backing provides excellent heat reflection and light reflection.
• Good adhesion and stability solvent adhesive,no residual glue.
• Strong stickiness, wide range of application
• High Tensile & Tear Strength, Permanent Bonding
• Match Foil-Glass Cloth Laminate
Applications:
HVAC industry for joining and sealing Alum.-Glass Facing laminated fiberglass blanket / duct board joints and seams;
Industrial FR grade foil-glass cloth tape. Specially designed for industrial equipment and pipe as well as vessel engine room's thermal Insulation.
Joining and sealing industrial pipe insulation’ seams and connections.
May also be used for other industrial uses requiring a tape with these characteristics and benefits.
Packaging & Shipping
Surface Preparation
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
Product Use
It is essential that the user evaluate the KintTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on KintTape products between +10℃ ~ 40℃(+50°F ~ +105°F).
Product Tags:
|
|
Flame Retardant Waterproof Tape Aluminum Foil HVAC Rubber Adhesive Glass Fiber Tape Images
|
